Calibration standards from a liquid handler: how to verify what the robot made.

Verifying calibration standards prepared on an automated liquid handler such as a Hamilton Microlab STAR: liquid classes for volatile solvents, gravimetric verification, ISO 23783, compounding serial dilution error, and independent QCs.
Matrix-matched, solvent or standard addition: choosing the calibration the sample needs.

Matrix-matched calibration versus solvent calibration and standard addition: how to measure matrix effects, the 20% threshold in SANTE 11312/2021, ICH M10 matrix effect testing, and when each approach fits.
Over-curve samples: dilution, extrapolation and the internal standard problem.

What to do with samples above the calibration range: why extrapolation fails, how to dilute with internal standard methods, dilution integrity under ICH M10, and EPA 8000D and 8260D requirements.
Dropping calibration points: what the rules allow, and what auditors ask.

When a calibration point can be excluded: EPA Method 8000D, the TNI standard and ICH M10 on removing standards, narrowing the range, automatic outlier removal, and the documentation auditors expect.
Negative or missing results at the low end: when the intercept outweighs the response.

Why calibration curves return negative or blank concentrations at the low end: intercepts, weighting, forcing through zero, and what EPA 8000D, 8260D and ICH M10 say about reporting near the LLOQ.
Calibration standard stability: why curves drift up, drift down, or fail a new lot.

Calibration standard stability: solvent evaporation, analyte degradation and lot-to-lot differences, what EPA 8260D, ICH M10 and SANTE 11312/2021 require, and how to catch a standard that has changed.
Serial or independent dilutions: how standard prep error gets inside the curve.

Serial dilution versus independent dilution of calibration standards: how pipette bias compounds, why a wrong stock never shows in the curve, and what second-source checks can and cannot catch.
Averaged replicates or individual points: the setting that hides a failing level.

Averaging calibration replicates or fitting individual points: what ICH M10 and EPA Method 8000D say, why the averaged view can pass a level the replicates fail, and how to choose and document the approach.
Internal standard response drift: when the correction stops correcting.

Internal standard response drift during and after the initial calibration: what EPA 8260D, ICH M10 and FDA guidance require, why the correction fails when analyte and internal standard drift apart, and how to trend it.
FDA data integrity actions against bioanalytical CROs: what the notifications share.

FDA data integrity notifications named five bioanalytical CROs since 2016. What FDA found, what sponsors had to do and which record controls apply.